Asian stocks fell, extending a rout that wiped out about $400 billion from the value of global equities yesterday, amid concern that central banks from Tokyo to Washington are increasingly reluctant to add stimulus.
Toyota Motor Corp., the world�� largest carmaker, retreated 1.8 percent in Tokyo after the yen yesterday gained the most in three years. Hyundai Merchant Marine Co. (011200) plunged 15 percent in Seoul after North Korea called off talks yesterday on a joint industrial zone. Nomura Real Estate Master Fund Inc. (3285), Japan�� largest initial public offering this year, fell 6.2 percent in its debut.
The MSCI Asia Pacific Index was little changed at 131.65 as of 8:44 p.m. in Tokyo, with about two shares falling for each that advanced. Markets in China, Hong Kong, Taiwan and the Philippines were shut for holidays.
��here�� lots of confusion around the world at present about what central bank policy means for the outlook of the global economy, earnings and valuations,��Matthew Sherwood, Sydney-based head of market research at Perpetual Ltd., which manages about $25 billion, said by e-mail. ��he Fed is likely to continue to be ambiguous about its next step, probably because it�� not sure. This will see markets continue to be volatile.��
Hot Asian Stocks For 2014: Express-1 Expedited Solutions Inc.(XPO)
XPO Logistics, Inc. provides third-party logistics services using a network of relationships with ground, sea, and air carriers in the United States, Mexico, and Canada. It operates in three segments: Express-1, Concert Group Logistics, and Bounce Logistics. The Express-1 segment offers ground expedited surface transportation services for freight. It operates a fleet ranging from cargo vans to semi tractor trailer units. The Concert Group Logistics segment provides domestic and international freight forwarding services through a network of independently owned stations. Its domestic freight forwarding services include air charter, expedites, and time sensitive services, as well as cost sensitive services comprising deferred delivery, less than truckload, and full truck load services; and international freight forwarding services consist of on-board courier and air charters, time sensitive services, less-than-container and full-container-loads, and vessel charters. This segm ent also offers documentation on international shipments, customs clearance and banking, trade show shipment management, time definite and customized product distributions, reverse logistics and on site asset recovery projects, installation coordination, freight optimization, and diversity compliance support services. The Bounce Logistics segment provides premium freight brokerage services for truckload shipments. The company serves approximately 4,000 retail, commercial, manufacturing, and industrial customers through 6 U.S. operations centers and 22 agent locations. It offers its services to the automotive manufacturing, automotive components and supplies, commercial printing, durable goods manufacturing, pharmaceuticals, food and consumer products, and high tech sectors. The company was formerly known as Express-1 Expedited Solutions, Inc. and changed its name to XPO Logistics, Inc. in September 2011. XPO Logistics, Inc. was founded in 1989 and is based in Buchanan, Michi gan.
Advisors' Opinion:- [By Jake L'Ecuyer]
XPO Logistics (NYSE: XPO) shot up 7.06 percent to $30.01 after the company announced its plans to acquire Pacer International (NASDAQ: PACR) in a deal valued at $335 million.
- [By Travis Hoium]
What: Shares of XPO Logistics (NYSE: XPO ) jumped 13% today after announcing an acquisition.
So what: The company will pay $365 million for logistics provider 3PD, consisting of $357 million in cash an $8 million in XPO restricted stock. Is will use its own cash and borrow $195 million from Credit Suisse Group for the remainder of the purchase. �
Hot Asian Stocks For 2014: China Jo-Jo Drugstores Inc.(CJJD)
China Jo-Jo Drugstores, Inc. owns and operates a retail pharmacy chain in the People?s Republic of China. Its stores sell various medicinal products, including prescription and over-the-counter drugs, nutritional supplements, traditional Chinese medicine products, personal care products, family care products, and medical devices, as well as convenience products including consumable, seasonal, and promotional items. The company also has licensed doctors, who provide consultation, examination, and treatment of common ailments. In addition, its stores include medical clinics that offer urgent care, traditional Chinese medicines, and minor outpatient surgical treatments. The company operates a chain of approximately 55 drugstores under the Jiuzhou Grand Pharmacy Quannuo Grand Pharmacy, and Lydia Grand Pharmacy brand names. The company is headquartered in Hangzhou, the People?s Republic of China.
Advisors' Opinion:- [By Roberto Pedone]
Another under-$10 drug retailer that's starting to move within range of triggering a big breakout trade is China Jo-Jo Drugstores (CJJD), which operates as a retailer and distributor of pharmaceutical and other health care products in the People's Republic of China. This stock has been on fire for the last three months, with shares ripping higher by 46%.
If you take a look at the chart for China Jo-Jo Drugstores you'll notice that this stock has been uptrending strong over the last month and change, with shares moving higher from its low of 65 cents per share to its recent high of $1.18 a share. During that uptrend, shares of CJJD have been making mostly higher lows and higher highs, which is bullish technical price action. That move has now pushed shares of CJJD within range of triggering a big breakout trade above some near-term and past overhead resistance levels.
Market players should now look for long-biased trades in CJJD if it manages to break out above some near-term overhead resistance at $1.18 a share and then once it clears some past overhead resistance levels at $1.21 to $1.32 a share high volume. Look for a sustained move or close above those levels with volume that hits near or above its three-month average action of 99,122 shares. If that breakout hits soon, then CJJD will set up to re-test or possibly take out its next major overhead resistance levels at $1.70 to its 52-week high at $1.99 a share.
Traders can look to buy CJJD off weakness to anticipate that breakout and simply use a stop that sits just below its 50-day moving average of 98 cents per share. One can also buy CJJD off strength once it starts to clear those breakout levels with volume and then simply use a stop that sits a comfortable percentage from your entry point.
Top 5 Specialty Retail Stocks To Invest In Right Now: Yingli Green Energy Holding Company Limited(YGE)
Yingli Green Energy Holding Company Limited, together with its subsidiaries, engages in the design, development, manufacture, marketing, sale, and installation of photovoltaic (PV) products in the People?s Republic of China and internationally. The company offers PV cells, PV modules, and integrated PV systems, as well as polysilicon ingots, blocks, and wafers. It sells its PV modules to distributors, wholesalers, power plant developers and operators, and PV system integrators in Germany, the United States, Italy, China, Spain, the Netherlands, Greece, the Czech Republic, the United Kingdom, South Korea, and Japan under the Yingli and Yingli Solar brand names. The company also offers its integrated PV systems directly to end-users or to contractors for use in the electricity projects, as well as to mobile communications companies in the People's Republic of China. Yingli Green Energy Holding Company Limited was founded in 1998 and is headquartered in Baoding, the People? s Republic of China.
Advisors' Opinion:- [By Travis Hoium]
What: Solar stocks are shooting higher again today as the strong run in 2013 continues. LDK Solar (NYSE: LDK ) , Canadian Solar (NASDAQ: CSIQ ) , Yingli Green Energy (NYSE: YGE ) , Hanwha SolarOne (NASDAQ: HSOL ) , and JinkoSolar (NYSE: JKS ) led the way, gaining between 10% and 22% today.
- [By Travis Hoium]
Europe cuts solar lifeline -- solar lives on
Europe has been even more aggressive cutting subsidies the solar industry once relied on. Germany began 2011 with feed-in tariffs that ranged from 0.29 euros per kilowatt-hour for a rooftop system to 0.21 euros per kW-hr for a large ground-mounted system. Today, a rooftop system will earn 0.165 euros per kW-hr and a utility scale system will earn 0.195 euros per kW-hr. The driver of feed-in tariff reductions is the rapidly falling cost of solar. We talk about how the flood of cheap Chinese panels affect prices and competition here in the U.S., but solar giants Yingli Green Energy (NYSE: YGE ) and Trina Solar (NYSE: TSL ) count on Europe for most of their demand, and they're responsible for a lot of the drop in costs there. - [By Travis Hoium]
Don't look now but SunPower (NASDAQ: SPWR ) has become the best-performing stock in the solar industry. Over the past year, it's been better than fellow U.S.-based companies First Solar (NASDAQ: FSLR ) and SolarCity (NASDAQ: SCTY ) , and far better than most Chinese manufacturers. Yingli Green Energy (NYSE: YGE ) and Trina Solar lag well behind even after recent pops higher; only Canadian Solar (NASDAQ: CSIQ ) can come close to SunPower's return (and I'll get into the reason for that below).
- [By Travis Hoium]
Another record in solar
We've been hearing about solar efficiency records for years. Yingli Green Energy (NYSE: YGE ) said that its Panda cells reached 19.89% efficiency way back in 2011. Trina Solar's Honey technology can reach 19.6% efficiency. Then there's the efficiency leader, SunPower (NASDAQ: SPWR ) , whose Maxeon cells can be 24% efficient, creating a 21.5% efficient production module.
Hot Asian Stocks For 2014: IDEX Corp (IEX)
IDEX Corporation (IDEX), incorporated on September 24, 1987, is an applied solutions business that sells an array of pumps, flow meters and other fluidics systems and components and engineered products to customers in a variety of markets worldwide. All of the Company�� business activities are carried out through wholly owned subsidiaries. IDEX operates in three business segments: Fluid & Metering Technologies, Health & Science Technologies and Fire & Safety/Diversified Products. Reporting units in the Fluid & Metering Technologies segment consist of Banjo; Energy and Fuels (Energy); Chemical, Food & Process (CFP) and Water & Waste Water (Water). Reporting units in the Health & Science Technologies segment consist of IDEX Health & Science (IH&S); IDEX Optics and Photonics (IOP); Precision Polymer Engineering (PPE); Gast; Micropump and Materials Process Technologies (MPT). Reporting units in the Fire & Safety/Diversified Products segment consist of Fire Suppression; Rescue Tools and Band-It. In July 20, 2012, it acquired Matcon Group Limited. In March 2013, it announced the acquisition of FTL Seals Technology, Ltd. On April 11, 2012, the Company acquired the stock of PPC. On April 30, 2012, the Company acquired the stock of ERC.
Fluid & Metering Technologies Segment
The Fluid & Metering Technologies Segment designs, produces and distributes displacement pumps, flow meters, injectors, and other fluid-handling pump modules and systems and provides flow monitoring and other services for the water and wastewater industries. Fluid & Metering Technologies pump and metering solutions serve a range of end markets, including industrial infrastructure (fossil fuels, refined and alternative fuels, and water and wastewater), chemical processing, agricultural, food and beverage, pulp and paper, transportation, plastics and resins, electronics and electrical, construction and mining, pharmaceutical and bio-pharmaceutical, machinery and other markets. Fluid & Metering Technologies accounte! d for 43% of IDEX�� sales and 82% of IDEX�� operating income, with approximately 46% of its sales to customers outside the United States as of December 31, 2012, with approximately 46% of its sales to customers outside the United States. Banjo is a provider of pumps, valves, fittings and systems used in liquid handling. Banjo is based in Crawfordsville, Indiana and its products are used in agricultural and industrial applications. Approximately 11% of Banjo�� sales during 2012 were to customers outside the United States.
Energy consists of the Company�� Corken, Faure Herman, Liquid Controls, S.A.M.P.I. and Toptech businesses. Energy is a supplier of flow meters, electronic registration and control products, rotary vane and turbine pumps, reciprocating piston compressors, and terminal automation control systems. Energy has facilities in Longwood, Florida and Zwijndrech, Belgium (Toptech products), Oklahoma City, Oklahoma (Corken products), La Ferte Bernard, France (Faure Herman products), Vadodara, Gujarat, India (Liquid Controls products), and Altopascio, Italy (S.A.M.P.I. products). Applications for Liquid Controls and S.A.M.P.I. positive displacement flow meters, electronic, registration and control products include mobile and stationary metering installations for wholesale and retail distribution of petroleum and liquefied petroleum gas, aviation refueling, and industrial metering and dispensing of liquids and gases. Corken products consist of rotary vane pumps, single and multistage regenerative turbine pumps, and small horsepower reciprocating piston compressors. Toptech supplies terminal automation hardware and software to control and manage inventories, as well as transactional data and invoicing, to customers in the oil, gas and refined-fuels markets. Faure Herman is a supplier of ultrasonic and helical turbine flow meters used in the custody transfer and control of fluids and gases. Approximately 53% of Energy�� sales during 2012 were to customers outside the United State! s.
!
CFP consists of the Company�� Richter, Viking and Warren Rupp businesses. CFP is a producer of air-operated and motor-driven double-diaphragm pumps and replacement parts, lined pumps, valves and control equipment for the chemical, fine chemical and pharmaceutical industries, and external gear pumps. Richter�� corrosion resistant fluoroplastic lined products offer solutions for applications in the process industry. Viking�� products consist of external gear pumps, strainers and reducers, and related controls used for transferring and metering thin and viscous liquids sold under the Viking and Wright Flow brands and air-operated double-diaphragm pumps sold under the Blagdon brand. Markets served by Viking products include chemical, petroleum, pulp and paper, plastics, paints, inks, tanker trucks, compressor, construction, food and beverage, personal care, pharmaceutical and biotech. Warren Rupp products (which also include Pumper Parts and Versa-Matic products) are used for abrasive and semisolid materials, as well as for applications where product degradation is a concern or where electricity is not available or should not be used. Markets served by Warren Rupp products include chemical, paint, food processing, electronics, construction, utilities, mining and industrial maintenance. CFP maintains operations in Kampen, Germany (Richter products), Cedar Falls, Iowa (Richter and Viking products), Eastbourne, East Sussex, England, Shannon, Ireland (Viking products) and Mansfield, Ohio (Warren Rupp products). CFP primarily uses independent distributors to market and sell its products. Approximately 54% of CFP�� sales during 2012 were to customers outside the United States.
Water consists of the Company�� ADS, IETG, iPEK, Knight and Pulsafeeder businesses. Water is a provider of metering technology and flow monitoring products and underground surveillance services for water and wastewater markets, as well as a manufacturer of pumps and dispensing equipment for industrial laundries! , commerc! ial dishwashing and chemical metering, and a provider of metering pumps, special-purpose rotary pumps, peristaltic pumps, fully integrated pump and metering systems, custom chemical-feed systems, electronic controls and dispensing equipment. ADS�� products and services provide integrated solutions that enable industry, municipalities and government agencies to analyze and measure the capacity, quality and integrity of wastewater collection systems, including the maintenance and construction of such systems. IETG�� products and services enable water companies to manage their water distribution and sewerage networks, while its surveillance service specializes in underground asset detection and mapping for utilities and other private companies. iPEK supplies remote controlled systems used for infrastructure inspection. Knight is a manufacturer of pumps and dispensing equipment for industrial laundries, commercial dishwashing and chemical metering. Pulsafeeder products are used to introduce precise amounts of fluids into processes to manage water quality and chemical composition, as well as peristaltic pumps. Its markets include water and wastewater treatment, oil and gas, power generation, pulp and paper, chemical and hydrocarbon processing, and swimming pools. Water maintains operations in Huntsville, Alabama and various other locations in the United States, Sydney, New South Wales, Australia and Melbourne, Victoria, Australia (ADS products), Leeds, England (IETG products and services), Hirschegg, Austria, and Sulzberg, Germany (iPEK products), Lake Forest, California, Mississauga, Ontario, Canada, Eastbourne, East Sussex, England, Unanderra, Australia, and Ciudad Juarez, Chihuahua, Mexico (Knight products), Rochester, New York, Punta Gorda, Florida and Milan, Italy (Pulsafeeder products). Approximately 47% of Water�� sales during 2012 were to customers outside the United States.
Water Services & Technology (WST) consists of the Company�� ADS, IETG and iPEK businesses. WST is a provi! der of me! tering technology and flow monitoring products and underground surveillance services for wastewater markets. ADS�� products and services provide integrated solutions that enable industry, municipalities and government agencies to analyze and measure the capacity, quality and integrity of wastewater collection systems, including the maintenance and construction of such systems. IETG�� products and services enable water companies to manage their water distribution and sewerage networks, while its surveillance service specializes in underground asset detection and mapping for utilities and other private companies. iPEK supplies remote controlled systems used for infrastructure inspection. WST maintains operations in Huntsville, Alabama and various other locations in the United States and Australia (ADS products and services); Leeds, England (IETG products and services); and Hirschegg, Austria, and Sulzberg, Germany (iPEK products). Approximately 40% of WST�� 2012 sales were to customers outside the United States.
The Company competes with Pump Solutions Group, Dover Corporation, Milton Roy and Tuthill Corporation.
Health & Science Technologies Segment
The Health & Science Technologies Segment designs, produces and distributes a range of precision fluidics, rotary lobe pumps, centrifugal and positive displacement pumps, roll compaction and drying systems used in beverage, food processing, pharmaceutical and cosmetics, pneumatic components and sealing solutions, including pumping solutions required in analytical instrumentation, clinical diagnostics and drug discovery, molded and extruded, biocompatible medical devices and implantables, air compressors used in medical, dental and industrial applications, optical components and coatings for applications in the fields of scientific research, defense, aerospace, telecommunications and electronics manufacturing, laboratory and commercial equipment used in the production of micro and nano scale materials, precision pho! tonic sol! utions used in life sciences, research and defense markets, and precision gear and peristaltic pump technologies. The segment accounted for 35% of IDEX�� sales and 35% of operating income in 2012, with approximately 54% of its sales to customers outside the United States.
IH&S consists of Eastern Plastics, Rheodyne, Ismatec, Sapphire Engineering, Upchurch Scientific and ERC, which was acquired in April 2012. IH&S has facilities in Rohnert Park, California (Rheodyne products); Bristol, Connecticut (Eastern Plastics products); Wertheim-Mondfeld, Germany (Ismatec products); Middleboro, Massachusetts (Sapphire Engineering products); Oak Harbor, Washington (Ismatec and Upchurch Scientific products); and Kawaguchi, Japan (ERC products). Eastern Plastics products, which consist of high- precision integrated fluidics and associated engineered plastics solutions, are used in a set of end markets including medical diagnostics, analytical instrumentation, and laboratory automation. Rheodyne products consist of injectors, valves, fittings and accessories for the analytical instrumentation market. Rheodyne products are used by manufacturers of high pressure liquid chromatography equipment servicing the pharmaceutical, biotech, life science, food & beverage, and chemical markets. Ismatec products include peristaltic metering pumps, analytical process controllers, and sample preparation systems. Sapphire Engineering and Upchurch Scientific products consist of fluidic components and systems for the analytical, biotech and diagnostic instrumentation markets, such as fittings, precision-dispensing pumps and valves, tubing and integrated tubing assemblies, filter sensors and other micro-fluidic and nano-fluidic components, as well as advanced column hardware and accessories for the high performance liquid chromatography (HPLC) market. Sapphire Engineering and Upchurch Scientific products primarily serve the pharmaceutical, drug discovery, chemical, biochemical processing, genomics/proteomics research, envir! onmental ! labs, food/agriculture, medical lab, personal care, and plastics/polymer/rubber production markets. ERC manufactures gas liquid separations and detection solutions for the life science, analytical instrumentation and clinical chemistry markets. ERC�� products consist of in-line membrane vacuum degassing solutions, refractive index detectors and ozone generation systems. Approximately 52% of IH&S�� 2012 sales were to customers outside the United States.
IOP consists of CVI Melles Griot (CVI MG), Semrock and AT Films (the Precision Photonics portion of the AT Films business was acquired in April 2012). CVI MG is a into design and manufacture of precision photonic solutions used in the life sciences, research, semiconductor, security and defense markets. CVI MG�� products are focused on the generation, control and productive use of light for a variety of key science and industrial applications. Products consist of specialty lasers and light sources, electro-optical components, specialty shutters, opto-mechanical assemblies and components. In addition, CVI MG produces critical components for life science research, electronics manufacturing, military and other industrial applications including lenses, mirrors, filters and polarizers. These components are utilized in a number of applications such as spectroscopy, cytometry (cell counting), guidance systems for target designation, remote sensing, menology and optical lithography.
CVI MG is headquartered in Albuquerque, New Mexico, with additional manufacturing sites located in Carlsbad, California; Rochester, New York; Isle of Man, British Isles; Leicester, England; Kyongki-Do, Korea; Tokyo, Japan; Didam, The Netherlands; and Singapore. Semrock is a provider of optical filters for biotech and analytical instrumentation in the life sciences markets. Semrock�� optical filters are produced using state-of-the-art manufacturing processes which enable it to offer its customers improvements in instrument performance and reliability.! Semrock ! is located in Rochester, New York. AT Films specializes in optical components and coatings for applications in the fields of scientific research, defense, aerospace, telecommunications and electronics manufacturing. The Precision Photonics portion of its business specializes in optical components and coatings for applications in the fields of scientific research, aerospace, telecommunications and electronics manufacturing. AT Films is headquartered in Boulder, Colorado. Approximately 57% of IOP�� 2012 sales were to customers outside the United Sates.
Containment consists of Precision Polymer Engineering (PPE). PPE, which is located in Blackburn, England, is a provider of high performance seals and advanced sealing solutions for a diverse range of global industries and applications, including hazardous duty, analytical instrumentation, semiconductor/solar, process technologies, pharmaceutical, electronics, and food applications. Approximately 79% of PPE�� 2012 sales were to customers outside the United States.
Gast consists of the Company�� Gast and Jun-Air businesses. The Gast business is a manufacturer of air-moving products, including air motors, low-range and medium-range vacuum pumps, vacuum generators, regenerative blowers and fractional horsepower compressors. Gast products are used in a variety of long-life applications requiring a quiet, clean source of moderate vacuum or pressure. Gast products primarily serve the medical equipment, environmental equipment, computers and electronics, printing machinery, paint mixing machinery, packaging machinery, graphic arts, and industrial manufacturing markets. The Jun-Air business is a provider of low-decibel, ultra-quiet vacuum compressors suitable for medical, dental and laboratory applications. Based in Benton Harbor, Michigan, Gast also has a logistics and commercial center in Redditch, England. Approximately 27% of Gast�� 2012 sales were to customers outside the United States.
Micropump, headquartered i! n Vancouv! er, Washington, produces, precision-engineered, magnetically and electromagnetically driven rotary gear, piston and centrifugal pumps. Micropump products are used in low-flow abrasive and corrosive applications. Micropump products primarily serve the printing machinery, medical equipment, paints and inks, chemical processing, pharmaceutical, refining, laboratory, electronics, pulp and paper, water treatment, textiles, peristaltic metering pumps, analytical process controllers and sample preparation systems markets. Approximately 77% of Micropump�� 2012 sales were to customers outside the United States.
MPT consists of Quadro, Fitzpatrick, Microfluidics and Matcon Group Limited (Matcon), which was acquired in July 2012. Quadro is a provider of particle control solutions for the pharmaceutical and bio-pharmaceutical markets. Based in Waterloo, Ontario, Canada, Quadro�� activities include fine milling, emulsification and special handling of liquid and solid particulates for laboratory, pilot phase and production scale processing within the pharmaceutical and bio-pharmaceutical markets. Fitzpatrick is into the design and manufacture of process technologies for the pharmaceutical, food and personal care markets. Fitzpatrick designs and manufactures customized size reduction, roll compaction and drying systems to support their customers��product development and manufacturing processes. Fitzpatrick is headquartered in Elmhurst, Illinois. Microfluidics is into designing and manufacturing of laboratory and commercial equipment used in the production of micro and nano scale materials for the pharmaceutical and chemical markets. Microfluidics is the producer of the Microfluidizer family of high shear fluid processors for uniform particle size reduction, robust cell disruption and nanoparticle creation. Microfluidics has offices in Newton, Massachusetts. Matcon is into material processing solutions for high value powders used in the manufacture of pharmaceuticals, food, plastics, and fine chemic! als.
!Matcon�� products consist of the original cone valve powder discharge system and filling, mixing and packaging systems, all of which support its customers��automation and process requirements. Matcon is located in Evesham, Worcestershire, England. Approximately 61% of MPT�� 2012 sales were to customers outside the United States.
The Company competes with Gardner Denver, Inc., Thermo Scientific Dionex, Gooch & Housego PLC, Parker Hannifin and Valco Instruments Co., Inc.
Fire & Safety/Diversified Products Segment
The Fire & Safety/Diversified Products segment produces firefighting pumps and controls, rescue tools, lifting bags and other components and systems for the fire and rescue industry, engineered stainless steel banding and clamping devices used in a variety of industrial and commercial applications, and precision equipment for dispensing, metering and mixing colorants and paints used in a variety of retail and commercial businesses around the world. The segment accounted for 22% of IDEX�� sales and 53% of IDEX�� operating income in 2012, with approximately 56% of its sales to customers outside the United States.
Fire Suppression consists of the Company�� Class I, Hale and Godiva businesses, which produce truck-mounted and portable fire pumps, stainless steel valves, foam and compressed air foam systems, pump modules and pump kits, electronic controls and information systems, conventional and networked electrical systems, and mechanical components for the fire, rescue and specialty vehicle markets. Fire Suppression�� customers are primarily OEMs. Fire Suppression is headquartered in Ocala, Florida (Class 1 and Hale products), with additional facilities located in Warwick, England (Godiva products). Approximately 41% of Fire Suppression�� 2012 sales were to customers outside the United States.
Rescue consists of the Company�� Dinglee, Hurst Jaws of Life, Lukas and Vetter businesses, which produce hydraulic! , battery! , gas and electric-operated rescue equipment, hydraulic re-railing equipment, hydraulic tools for industrial applications, recycling cutters, pneumatic lifting and sealing bags for vehicle and aircraft rescue, environmental protection and disaster control, and shoring equipment for vehicular or structural collapse. Rescue Tool�� customers are primarily public and private fire and rescue organizations. Rescue has facilities in Shelby, North Carolina (Hurst Jaws of Life products); Tianjin, China (Dinglee products); Erlangen, Germany (Lukas products); and Zulpich, Germany (Vetter products). Approximately 75% of Rescue�� 2012 sales were to customers outside the United States.
Band-It is a producer of stainless steel banding, buckles and clamping systems. Band-It products are used for securing exhaust system heat and sound shields, industrial hose fittings, traffic signs and signals, electrical cable shielding, identification and bundling, and in numerous other industrial and commercial applications. Band-It products primarily serve the automotive, transportation equipment, oil and gas, general industrial maintenance, electronics, electrical, communications, aerospace, utility, municipal and subsea marine markets. Band-It is based in Denver, Colorado, with additional operations in Staveley, Derbyshire, England, and a IDEX shared manufacturing facility in China. Approximately 39% of Band-It�� 2012 sales were to customers outside the United States.
Dispensing Equipment produces precision equipment for dispensing, metering and mixing colorants and paints used in a variety of retail and commercial businesses worldwide. Dispensing Equipment is a global supplier of precision-designed tinting, mixing, dispensing and measuring equipment for auto refinishing and architectural paints. Dispensing Equipment products are used in retail and commercial stores, hardware stores, home centers, department stores, automotive body shops as well as point-of-purchase dispensers. Dispensing Equipmen! t is head! quartered in Wheeling, Illinois with additional facilities in Sassenheim, The Netherlands; Unanderra, Australia; and Milan, Italy, as well as IDEX shared manufacturing facilities in India and China. Approximately 59% of Dispensing Equipment�� 2012 sales were to customers outside the United States.
The Company competes with American Cast Iron Pipe Company, Holmatro, Inc., Nordic Capital and Panduit Corporation.
Advisors' Opinion:- [By Rich Duprey]
Diversified technology machinist�IDEX (NYSE: IEX ) announced yesterday its second-quarter dividend of $0.23�per share, the same rate it paid last quarter after raising the payout 15% from $0.20 per share.
- [By Ben Levisohn]
Xylem’s big day has also boosted other water-infrastructure stocks. Flowserve (FLS) has gained 1.2% to $70.59, Idex Corp. (IEX) has risen 0.5% to $68.69 and Thermo Fisher Scientific (TMO) has advanced 0.4% t0 $98.22.
Hot Asian Stocks For 2014: Toll Brothers Inc.(TOL)
Toll Brothers, Inc., together with its subsidiaries, designs, builds, markets, and arranges finance for single-family detached and attached homes in luxury residential communities. It is also involved in building or converting existing rental apartment buildings into high-, mid-, and low-rise luxury homes. In addition, the company develops, owns, and operates golf courses and country clubs associated with various planned communities, as well as individual communities. It serves move-up, empty-nester, active-adult, age-qualified, and second-home buyers in 19 states in the United States. Toll Brothers, Inc. was founded in 1967 and is headquartered in Horsham, Pennsylvania.
Advisors' Opinion:- [By John Maxfield]
The reason homebuilders like D.R. Horton (NYSE: DHI ) and Toll Brothers (NYSE: TOL ) are taking it on the chin, in turn, has to do with the trend in prices. To wit, the median price of a new home fell in June by nearly 5% from $262,800 in May to $249,700. And just like Apple's experience with falling iPhone sales, if this trend continues it will put pressure on these companies' margins, and thus their bottom lines.
- [By DailyFinance Staff]
LM Otero, AP The housing market has been leading the economic recovery, but have housing stocks hit the ceiling? They're jumping today after a very bullish report on housing starts: New construction projects last month topped the 1 million annual rate for the time since before the financial crisis began in 2008. That's lifted shares of leading homebuilders by two to four percent today, adding to the huge gains over the past year. KB Homes (KBH), Pulte (PHA) and Hovnanian (HOV) have all doubled in price over the past year. Lennar (LEN) is up 44 percent, D.R. Horton (DHI) is up 47 percent and Toll Brothers (TOL) 33 percent. Those gains have prompted several other builders to go public this year. Taylor Morrison Home (TMHC), Tri Pointe, and William Lyon Home have all moved higher since their IPOs. And even though there's plenty of optimism that housing will continue to lead the broader economic recovery, there's some concern that these stocks may slow down. Homebuilder stocks can no longer be considered cheap. So some analysts see alternate routes for investors looking to play the housing boom. One way is through home-improvement retailers, which benefit from sales of both new and existing homes. Other plays include lumber, furniture and appliance companies. It's also worth noting that today's report on home construction showed that starts of single-family homes actually declined in March. It was the more volatile multi-family sector that led the advance. But there may be some stock market opportunities in REITs – real estate investment trusts – which focus on apartments. Among the biggest ones are Post Properties, Essex Property Trust and Associated Estates. They make money from collecting monthly rents. And these stocks generally trade below the value of the properties they own. Even some builders known for single-family homes are moving into the multi-family segment. Lennar announced in January that it plans to enter the apartment rental mar
- [By Amanda Alix]
Homebuilders have seen their fortunes rise, too, particularly those playing either end of this particular boom. Luxury builder Toll Brothers (NYSE: TOL ) reported a sweet 46% increase in net income�from the first quarter of 2012, aided by an ability to tack on price increases averaging $26,000 per house�-- bringing the average price of a Toll house to a cool $577,000. Beazer Homes (NYSE: BZH ) is playing the single-family rental end of things, via its Pre-Owned Homes Division, a two-year old venture it started with Kohlberg Kravis Roberts (NYSE: KKR ) .
Hot Asian Stocks For 2014: Kabel Deutschland Holding AG (KD8)
Kabel Deutschland Holding AG is a Germany-based holding company and cable network operator. Through its operating entitities, the primarily being Kabel Deutschland Kundenbetreuung GmbH and Kabel Deutschland Vertrieb und Service GmbH, the Company provides analogue and digital television, broad band Internet and cable-based telecommunication services throughout Germany. The Company's activities are divided into two business segments: TV Business, the Company's dominant segment which includes cable-based television products such as analogue and digital cable television and radio, as well as digital pay-TV and related products. The second segment, Internet and Phone, offers broadband Internet access, fixed-line and mobile phone services, mobile data services, as well as additional options to those homes which can be connected to the Company's upgraded network. In October 2013, Vodafone Vierte Verwaltungs AG, a subsidiary of Vodafone Group PLC, acquired 76.57% interest in the Company. Advisors' Opinion:- [By Amy Thomson]
Vodafone has already expanded beyond wireless service, and in June beat John Malone�� Liberty Global (LBTYA) Plc to take over Germany�� Kabel Deutschland Holding AG. (KD8) Vodafone and Verizon accelerated talks on the stake sale after the Kabel Deutschland offer, which put additional pressure on the British company�� finances, a person familiar with the matter said.
- [By Sarah Jones]
Kabel Deutschland (KD8) jumped 8.2 percent to 80.84 euros, for the biggest advance on the Stoxx 600, after Vodafone, the world�� second-largest wireless carrier, confirmed it discussed acquiring the German cable operator to expand in the broadband and TV market.
- [By Alex Webb]
Vodafone Group Plc (VOD)�� 7.7 billion-euro ($10.2 billion) bid for Kabel Deutschland Holding AG (KD8) cleared a major hurdle by winning the backing of at least 75 percent of the German company�� shareholders.
Hot Asian Stocks For 2014: Digirad Corp (DRAD)
Digirad Corporation, incorporated in 1997, is the developer and manufacturer of medical diagnostic imaging systems, including solid-state gamma cameras for nuclear cardiology and general nuclear medicine applications. The Company operates in two segments: DIS (its diagnostic imaging service business) and its product segment. Through DIS, the Company provides in-office imaging services to physicians, offering certified personnel, required licensure, an imaging system and other support and supplies for the performance of nuclear and ultrasound imaging procedures under the supervision of its physician customers. The Companies imaging systems are sold in both portable and fixed configurations. DIS physician customers enter into annual lease contracts for imaging services generally delivered on a per-day basis. The Company�� product segment sells solid-state gamma cameras and provides camera service and maintenance.
Imaging Services
DIS offers portable nuclear and ultrasound imaging services. Its nuclear modality services include an imaging system, a certified nuclear medicine technologist and a cardiac stress technician, often certified or a trained nurse or paramedic, the supply of radiopharmaceuticals, and required licensing services for the performance of nuclear imaging procedures under the supervision of physicians. The ultrasound imaging service is similar, in that the Company provides the ultrasound equipment and one ultrasound technologist. Its portable nuclear imaging operations use a hub and spoke model, in which centrally located regional hubs anchor multiple van routes in the surrounding metropolitan areas. At its DIS hubs, clinical personnel load the equipment, radiopharmaceuticals, and other supplies onto specially equipped vans for transport to the physician�� office or other customer locations, where they set up the equipment for the day. The Company provides nuclear and ultrasound services primarily under annual contracts for services delivered on a per-day ! basis.
Products
Digirad markets and manufactures a line of nuclear medicine cameras for nuclear cardiology and general nuclear medicine applications. Its cameras are used in hospitals, imaging centers, physician offices and by mobile service providers. Its nuclear cameras feature detectors based on solid-state technology developed by the Company. The solid-state technology provides the Company with the capability to market and manufacture a diverse family of cardiac and general-purpose cameras.
The Cardius family of cardiac SPECT (single-photon emission computerized tomography) solid-state imagers makes it possible to image patients up to 500 pounds in a sitting position. Upright imaging makes it possible to image bariatric, COPD (chronic obstructive pulmonary disease) or claustrophobic patients that typically could not be imaged lying down on. The Company offers fixed dual-head and triple-head cardiac camera models for use within a facility and a portable dual-head configuration that makes it possible to move the system to provide service to multiple rooms or sites. Its flagship in cardiology is the Cardius XACT SPECT/CT system. It features a triple-head design and a low dose volume computed tomography (CT) attenuation correction methodology.
The Company�� ergo is a large-field-of-view planar portable imaging camera. The ergo imaging system is targeted to hospitals with multi-camera general nuclear medicine departments, academic centers, pediatric hospitals, regional trauma centers, women�� health centers and cancer centers. The Company also provides triple-head Cardius 3 XPO system, which provides shorter image acquisition time. Its Cardius X-ACT camera is a rapid cardiac SPECT/VCT imager. The Cardius X-ACT camera is positioned more toward the hospital and larger cardiology practices.
Advisors' Opinion:- [By John Kell and Tess Stynes var popups = dojo.query(".socialByline .popC"); p]
Digirad Corp.(DRAD) agreed to pay at least $3.5 million in cash to acquire medical-outsourcing provider Telerhythmics, a deal that will add to the larger company’s sales and bottom line.
- [By Lisa Levin]
Digirad (NASDAQ: DRAD) shares created a new 52-week high of $3.989 on Q3 results.
Posted-In: 52-Week HighsNews Intraday Update Markets Movers
Hot Asian Stocks For 2014: Stock Building Supply Holdings Inc (STCK)
Stock Building Supply Holdings, Inc., incorporated on April 16, 2009, is a diversified lumber and building materials (LBM) distributor and solutions provider that sells to new construction and repair and remodel contractors. The Company�� primary products are lumber & lumber sheet goods, millwork, doors, flooring, windows, structural components, such as engineered wood products (EWP), trusses, wall panels and other exterior products. The Company serves a customer base, including large-scale production homebuilders, custom homebuilders and repair and remodeling contractors. In addition, the Company provides solution-based services to its customers, including design, product specification and installation management services. The Company�� primary operating regions include the South and West regions of the United States.
The Company provides a balanced mix of products and services to the United States production and custom homebuilders and repair and remodel, multi-family and commercial contractors. The Company offer over 39,000 products sourced through its strategic network of suppliers, which together with its various solution-based services; represent approximately 50% of the construction cost of a new home.
Advisors' Opinion:- [By Monica Gerson]
Stock Building Supply Holdings (NASDAQ: STCK) dipped 1.53% to $19.95 in the pre-market session after the company prices 5.6 million shares at $19.50 per share by selling shareholders.
Hot Asian Stocks For 2014: Alcobra Ltd (ADHD)
Alcobra Ltd is an Israel-based Biopharmaceutical company. It focuses on the development and commercialization of a proprietary drug, MG01CI, to treat Attention Deficit Hyperactivity Disorder (ADHD), a common and morbid neuropsychiatric condition in children and adults. Adult ADHD is associated with increased health risks and healthcare costs, higher divorce rates, lower levels of socioeconomic attainment, lower academic achievement, unemployment and work place deficits, increased risks for motor vehicle accidents, greater likelihood of additional psychiatric disorders, increased criminal activity and incarceration, and higher rates of substance use and abuse. MG01CI product has completed phase two studies. Advisors' Opinion:- [By Roberto Pedone]
A biopharmaceutical stock that's starting to trend within range of triggering a big breakout trade is Alcobra (ADHD), which is engaged in the development and commercialization of its proprietary drug, MG01CI, to treat attention deficit hyperactivity disorder. This stock has been on fire so far in 2013, with shares up huge by 126%.
If you take a look at the chart for Alcobra, you'll notice that this stock has been trending sideways and consolidating over the last month and change, with shares moving between $14.78 on the downside and $18.75 on the upside. Shares of ADHD have now started to uptrend a bit over the last few weeks, with shares moving higher from its low of $15.05 to its recent high of $18.45 share. That move has started to push shares of ADHD within range of triggering a big breakout trade above the upper-end of its recent sideways trading chart pattern.
Traders should now look for long-biased trades in ADHD if it manages to break out above its 50-day moving average of $17.79 a share, and then once it takes out some more key overhead resistance levels at $18.45 to $18.75 a share with high volume. Look for a sustained move or close above those levels with volume that hits near or above its three-month average action of 74,869 shares. If that breakout triggers soon, then ADHD will set up to re-test or possibly take out its next major overhead resistance levels at $22 to $24 a share. Any high-volume move above those levels will then give ADHD a chance to re-test or possibly take out its all-time high at $26.96 a share.
Traders can look to buy ADHD off any weakness to anticipate that breakout and simply use a stop that sits right below some near-term support levels at $16.17 to $15.05 a share, or around $14.78 a share. One could also buy ADHD off strength once it starts to clear those breakout levels with volume and then simply use a stop that sits a comfortable percentage from your entry point.
No comments:
Post a Comment